THE WORLD-FIRST INNOVATIVE 4-IN-1 DISINFECTION INSTALLATION COMBINING A SUITE OF TECHNOLOGIES INCLUDING THERMAL TEMPERATURE CHECK, BIOEM, A.I. SHIELD AND NEGATIVE ROOM PRESSURE DESIGN. IT IS ABLE TO PERFORM CONTACTLESS TEMPERATURE CHECK AND CONDUCT AUTOMATIC FULL-BODY DISINFECTION.
Specification:
Nozzle flow
Nozzle speed (average): 13.7 m/s
Turn over
Filter flowrate 0.18 m3/s
Fan on time 10 -58s
Filter turnover (@10 se 1.2 Vol/ cycle
Negative pressure -22.7 Pa
Made in HK HK HS Code 85437000
How does CLeanTech works:
step 1: temperature check before entry
after passing the temperature detection (sensethunder-e mini), the door opens and the person can walk into the negatively pressurized room.
Step 2: Dirt removal
disinfection procedure initiates, particles and dust on the person are blown off by vortex. Negatively pressurized chamber is equipped with a 0.3um hepa filtration that traps 99.99% of bacteria and virus, removing them from the chamber air volume. the air volume in the entire chamber is passed through the hepa filter more than once per cycle.
step 3: UV light triggers photocatalyst of a.i. shield antimicrobial protection coating
the a.i.shield antimicrobial protection coating applied on the wall of the chamber aims to kill off the bacteria and virus blown onto the wall by physical puncturing technology. along side the photocatalysyt, activated by uv light releases radicals that penetrate and inactive microbes on the surface of the person in the chamber. (uv light is turned off when the person steps into the chamber). the coating will decompose germs and virus into harmless carbon dioxide and water.
step 4: sterilize with bioem
bioem air sanitizing and purifying liquid is sprayed through fan nozzles that are angled at 90 degrees. it penetrates into the vortex flow and is sprayed evenly on the clothing as a final sterilisation procedure before stepping out of cleantech.
the whole process of above step 1,2,3,4 could be set 12 seconds to 40 seconds depending on the requirements.
CASE STUDY
asiawrold-expo, hong kong introduces the world's first innovative four-in-one disinfection installation. cleantech, which combines a suite of technologies, including bioem air santising and purifying technology with a.i.shield antimicrobial protection coating and negative room pressure design.
Contact information
aegis intelligent photocatalyst product development (greater chaina) ltd.
email: enquiry@aegisintelligent.com
phone: (852) 2426 2127 / 2426 0231 / 2426 2208
opening hours: mon-fri 9:00am - 6:00pm
address: flat A, 19/f, egl tower, 83 hung to road, kwun tong, kln, hong kong
copyright @ cleanfreak.store.
all rights reserved. all images and information are for reference only.